John Deere 8R-2304 8R-2704 8R-3004 (G4) Operation Manual OMTA28852TCU PDF

John Deere 8R-2304 8R-2704 8R-3004 (G4) Operation Manual OMTA28852TCU PDF

Size: 16.29 MB
Language: English
Make: John Deere
Machine: Tractor
Document: Operators Manual
Model: John Deere 8R-2304 8R-2704 8R-3004 (G4)
Part Number: OMTA28852TCU
Pages: 420 Pages

Detail Contents:
Introduction
Foreword
Emissions Performance and Tampering
Trademarks
Glossary
Glossary of Terms
Safety
Recognize Safety Information
Understand Signal Words
Follow Safety Instructions
Prepare for Emergencies
Wear Protective Clothing
Protect Against Noise
Handle Fuel Safely—Avoid Fires
Handle Starting Fluid Safely
Fire Prevention
In Case of Fire
Avoid Static Electricity Risk When Refueling
Keep ROPS Installed Properly
Use Foldable ROPS and Seat Belt Properly
Stay Clear of Rotating Drivelines
Use Steps and Handholds Correctly
Read Operator’s Manuals for ISOBUS Controllers
Use Seat Belt Properly
Operating the Tractor Safely
Avoid Backover Accidents
Limited Use in Forestry Operation
Operating the Loader Tractor Safely
Keep Riders Off Machine
Instructional Seat
Use Safety Lights and Devices
Transport Towed Equipment at Safe Speeds
Use Caution on Slopes, Uneven Terrain, and Rough Ground
Freeing a Mired Machine
Avoid Contact with Agricultural Chemicals
Handle Agricultural Chemicals Safely
Handling Batteries Safely
Avoid Heating Near Pressurized Fluid Lines
Remove Paint Before Welding or Heating
Handle Electronic Components and Brackets Safely
Practice Safe Maintenance
Avoid Hot Exhaust
Clean Exhaust Filter Safely
Work In Ventilated Area
Support Machine Properly
Prevent Machine Runaway
Park Machine Safely
Transport Tractor Safely
Service Cooling System Safely
Service Accumulator Systems Safely
Service Tires Safely
Service Front-Wheel Drive Tractor Safely
Tightening Wheel Retaining Bolts/Nuts
Avoid High-Pressure Fluids
Do Not Open High-Pressure Fuel System
Store Attachments Safely
Decommissioning — Proper Recycling and Disposal of Fluids and Components
Safety Signs
Operator’s Manual
Seat Belt
Engine Cooling System
Fuel Tank
No Rider
Rear Hitch
No Step
Rear PTO
Vehicle Overview
8R Series Tractor
Engine Operation
Engine Settings—Access
Engine Settings
Engine Settings—Engine Power
Engine Settings—Max Engine Speed
Engine Settings—Exhaust Filter System Overview
Engine Settings—AUTO Exhaust Filter Cleaning
Engine Settings—Disable AUTO Exhaust Filter Cleaning
Engine Settings—Parked Filter Cleaning
Required Machine Stop Warning
Engine Fuel System and Power Rating
Battery Disconnect Switch
Start the Engine
Theft Deterrent Systems
Run the Engine
Stop the Engine
Restart Engine That Has Run Out of Fuel
Reduce Fuel Consumption
Battery Booster or Charger
Cold Weather Operation
Cold Weather Starting—Without Starting Aid
Cold Weather Starting—With Starting Aid
Change Starting Fluid Canister
Auxiliary Heaters Use
Emissions Equipment
Aftertreatment Indicators Overview
Selective Catalytic Reduction (SCR) System Overview
Selective Catalytic Reduction (SCR) System—Final Tier 4/Stage V Engine
Disconnect Battery—Final Tier 4/Stage V Engine
Front Console
Front Console
Adjust Steering Wheel and Column
Operate Horn
Operate Wipers and Washers
Key Switch
Operate Turn Signals
Pedals
Operate Lights
Corner Post Display
Corner Post Display
CommandARM Controls
CommandARM
CommandARM Hitch Controls
CommandARM SCV Control Levers
CommandARM PTO Control Levers
CommandARM Climate, Radio, and Lighting Controls
CommandARM Controls—Left Side
CommandARM Secondary Brake Lever
CommandARM Joystick
CommandARM Navigation Bar
Adjust CommandARM Position
CommandCenter
Generation 4 Display
Machine Settings Overview
Navigate Generation 4 CommandCenter
Compatible Universal Displays
Power Display On and Off
Change Pages and Values
Factory and Service ADVISOR Installed Onscreen Help
Radar Calibration
Slip Calibration
Steering Settings—Access
Steering Settings
Steering Settings—ACS 2 Variable Ratio Steering
Steering Settings—ACS 2 Sensitivity
Steering Settings—Steering Wheel Resistance
Controls Setup
Install Video Display Camera
Drivetrain
Drivetrain Overview
Differential Lock
Mechanical Front-Wheel Drive (MFWD)
Brakes
Trailer Brake System Settings—Access
Trailer Brake System Settings
Trailer Brake System Settings—Brake Gain
Trailer Brake System Settings—Pre-Brake Offset
Trailer Brake System Settings—Trailer Brake Test
Trailer Brake System Settings—Advanced
Brake Use
Trailer Brakes Regulation (EAEU-compliant Tractors Only)
Hydraulic Trailer Brakes (If Equipped)
Air Trailer Brakes (If Equipped)
Transmission—General Information
Transmission Settings—Access Advanced
Transmission Settings—Advanced
Warm-Up Transmission-Hydraulic System
Backup Alarm
16-Speed PowerShift Transmission
Operate Transmission—16-Speed PowerShift
Shift Transmission—16-Speed PowerShift
16-Speed PowerShift Transmission Settings—Access
16-Speed PowerShift Transmission Settings
16-Speed PowerShift Transmission Settings—Automatic PowerShift
16-Speed PowerShift Transmission Settings—APS Sensitivity
PTO—General Information
PTO Settings—Access
PTO Settings
PTO Settings—Advanced
PTO Settings—Engagement Rate
PTO Settings—Rear PTO Speed Limit
PTO Settings—PTO Out-of-Seat
Operating Instructions
Operate PTOs
External PTO Switches
Select Correct Engine Speed
Rear PTO
Rear PTO Shield
Select Correct PTO Shaft
Change 540/1000 RPM PTO Stub Shafts
Attach PTO-Driven Implement
Rear Hitch
Hitch Lift Capacities
Rear Hitch Settings—Access
Rear Hitch Settings
Rear Hitch Settings—Upper Limit
Rear Hitch Settings—Drop Rate
Rear Hitch Settings—Raise Rate
Rear Hitch Settings—Load Depth
Rear Hitch Settings—Slip Sensitivity
Rear Hitch Settings—Position
Rear Hitch Settings—Advanced
Rear Hitch Settings—Position Control
Rear Hitch Settings—Draft Control
Hitch Control Lever Adjustments
Hitch Depth Set Point
Float Operation
Rear Hitch Components
External Hitch Switches
Draft Link Storage Position
Hitch Manual Lowering
Adjust Sway Blocks
Adjust Deluxe Stabilizer
Attach Implement to Walterscheid Couplers
Detach Implement from Walterscheid Couplers
Attach Implement to Quick-Hitch
Adjust Implement Level
Adjust Lateral Float
Detach Implement from Quick-Hitch
Convert Category 3/3N Convertible Quick-Hitch Lower Hooks
Convert Category 4N/3 Convertible Quick-Hitch Lower Hooks
Convert Category 4N/3 Convertible Quick-Hitch Upper Hooks
Drawbar
Drawbar Load Limitations
Scraper Applications
Calculate Static Vertical Drawbar Load
Calculate Vertical Drawbar Load Distance Behind Rear Axle
Adjust Drawbar
Install and Use Clevis Assembly—Category 3 Drawbar
Install and Use Clevis Assembly—Category 4 Drawbar
Hydraulics—General Information
Hydraulic System Overview
Hydraulic Option Connector
Selective Control Valves
SCV Settings—Access
SCV Settings
SCV Settings—Standard Mode
SCV Settings—Independent Mode
SCV Settings—Feature Mode
SCV Settings—Flow Adjustment
SCV Settings—Time Adjustment
SCV Settings—Advanced
SCV Settings—Activating Independent Mode
SCV Settings—Automation
SCV Settings—Assignment
SCV Settings—Flow Adjustment Sensitivity
SCV Control Lever Adjustments
External SCV Switches
Total SCV Flow
Operate SCVs with CommandARM Joystick
CommandARM Joystick—Layout and Joystick Lever Functions
Hydraulic Connections
Connect/Disconnect Hydraulic Hoses
Component Identification and Location
Using Load-Sensing Hydraulic System—Power-Beyond
Examples Using Load-Sensing Hydraulic System—Power-Beyond
Using Hydraulic Spray Pumps
Implement Connection Example 1—Pressure Control Valve Applications (Grain Drills or Air Seeders with Constant Down-Pressure System)
Implement Connection Example 2—Motor Application Using Motor Case Drain
Implement Connection Example 3—Motor Application Using SCV Retract and Auxiliary Motor Return
Implement Connection Example 4—Planter with Vacuum Motor and Return Line to SCV Using Motor Return Tip
Implement Connection Example 5—Planter with Vacuum Motor, Return Line to Motor Return and Lift Assist
Implement Connection Example 6—Planter with Vacuum Motor and Return Line to Motor Return
Using Hydraulic Motor Return
Using Hydraulic Motor Case Drain
Using Implements Requiring Large Volumes of Oil
TouchSet Depth Control
TouchSet Depth Control Settings and Adjustments
Connect/Disconnect the Implement Position Connector
Laser Scraper Control
Laser Scraper—Scrapers Equipped with Scraper Control Unit
Wheels and Tires—General Information
Determine Tire Load Capacity
Change Tire Size
Select Tire Combinations
Tire Load Index
Tire Inflation Pressure Guidelines
Clamp-On Dual Usage
Front Wheels and Tires
Tire Inflation Pressure Quick Reference Specification
Recommended Pressures—Group 42
Recommended Pressures—Group 43
Recommended Pressures—Group 44
Adjust and Tighten—Front Wheel Bolts
Install 425 mm Dual Extensions
Toe-In Check
Toe-In Adjustment—1300 MFWD
Toe-In Adjustment—1500 MFWD
Steering Stop, Fender, and Tread Settings
Tire, Steering Stop, and Fender Settings Table Explanation
Tire, Steering Stop, and Fender Settings—1300 MFWD
Tire, Steering Stop, and Fender Settings—1500 MFWD with Single Front Tires
Determine Mean Tread Spacing
Tire, Steering Stop, and Fender Settings—1500 MFWD and Dual Front Tires
Determine Rim Type
Wheel Settings—8-Position
Wheel Setting—16-Position
Steering Stop Settings—MFWD
Fender Settings—1300 MFWD
Fender Settings—1500 MFWD
Rear Wheels and Tires
Tire Inflation Pressure Quick Reference Specification
Recommended Pressures—Group 47
Recommended Pressures—Group 48
Recommended Pressures—Group 48—Continued
Recommended Pressures—Group 49
Rear Wheel, Tire, and Tread Guidelines
Minimum Tread Setting with Air Trailer Brakes and Inner Wheel Weights
Install Wheel to Cast Hub
Install Dual Wheel to Hub
Adjust and Tighten—Inner Drive Wheels with Standard Hubs
Adjust and Tighten—Dual Wheels with Standard Hubs
Adjust and Tighten—10-Bolt Heavy-Duty Hubs
Adjust and Tighten—12-Bolt Heavy-Duty Hubs
Tread Settings—Single Wheel
Wheel Settings—16-Position
Tread Settings—Dual Wheel
Tread Settings—Triple Wheel
Seats
Adjust Air Seat
Adjust ActiveSeat II
Operator Presence Sensor
Adjust Instructional Seat
Mirrors
Adjust Mirrors
Steps
Left-Hand Steps
Right-Hand Service Steps
Lights
Light Identification
Lights Settings—Access
Lights Settings
Lights Settings—Worklights Presets
Lights Settings—Hood/Belt Line Lights
Lights Settings—Advanced
Hazard and Extremity Lights
Beacon Light
7-Pin Outlet
Accessories
Right-Hand Side Console
CommandARM Storage
Right-Hand Front Corner Post
Left-Hand Rear Corner Post
Right-Hand Rear Corner Post
Refrigerator and Cool/Storage Box
Sunshade
Storage Compartments
Monitor Bracket Mounts
Emergency Exit
Install Business Band/Citizens Band (CB) Antenna and/or Radio
Mount StarFire Receiver
Mount RTK (Real-Time Kinematic) Radio
Implement Connector
RS232 Serial Communication Connection
HVAC
HVAC Settings—Access
HVAC Settings
HVAC Settings—Climate Control Automation
HVAC Settings—Set Temperature
HVAC Settings—Air Flow Mode
HVAC Settings—Fan Speed
HVAC Settings—Air Conditioning
Performance Ballasting
How to Calculate Maximum Permissible Download on Trailer Hitch
General Ballasting Information
General Guidelines
General Weight Split Guidelines
Ballast Options
Measure Slip
Quik-Tatch Weight Use
Rear Wheel Weight Use
Rear Wheel Weight Installation—Single Drive Wheel
Rear Wheel Weight Installation—Dual Drive Wheels
Controlling Power Hop-MFWD Tractors
Mounted Commodity Tank Use
Ballast Suggestions for Specific Implement Types
Calculate Tractor Ballast Package
Unballasted Tractor Weight Chart
Implement and Tractor Codes
Liquid Ballast Use
Transport
Drive Tractor on Roads
Transport with Ballast
Tow Loads
Tow Points
Tow Tractor
Tow Mode
Come Home Mode
Transporting on Flat-Bed Carrier
Tie-Down on Transport Carrier
Freeing a Mired Tractor
Fuel, Lubricants, and Coolant—General Information
Determine Tractor Engine Type
Minimizing the Effect of Cold Weather on Diesel Engines
Oil Filters
Fuel
Diesel Fuel
Supplemental Diesel Fuel Additives
Biodiesel Fuel
Lubricity of Diesel Fuel
Handling and Storing Diesel Fuel
Fill Fuel Tank
Testing Diesel Fuel
Fuel Filters
Diesel Exhaust Fluid (DEF)
Diesel Exhaust Fluid (DEF) — Use in Selective Catalytic Reduction (SCR) Equipped Engines
Storing Diesel Exhaust Fluid (DEF)
Refilling Diesel Exhaust Fluid (DEF) Tank
Fill DEF Tank—FT4/Stage V Engine
Testing Diesel Exhaust Fluid (DEF)
Disposal of Diesel Exhaust Fluid (DEF)
Engine Oil
Diesel Engine Oil Service Interval for Operation at High Altitude
John Deere Break-In Plus Engine Oil — Interim Tier 4, Final Tier 4, Stage IIIB, Stage IV, and Stage V
Diesel Engine Oil — Interim Tier 4, Final Tier 4, Stage IIIB, Stage IV, and Stage V
Engine Oil and Filter Service Intervals — Interim Tier 4, Final Tier 4, Stage IIIB, Stage IV, and Stage V Engines
Engine Coolant
Diesel Engine Coolant (Engine with Wet Sleeve Cylinder Liners)
Operating in Warm Temperature Climates
Water Quality for Mixing with Coolant Concentrate
Testing Coolant Freeze Point
Disposing of Coolant
Other Lubricants
Gear Oil
Multipurpose Extreme Pressure (EP) Grease
MFWD Axle Housing Oil
Corn Head Grease
Lubricant Storage
Alternative and Synthetic Lubricants
Mixing of Lubricants
Transmission and Hydraulic Oil
PowerShift Transmission Recalibration
Service—General Information
Do Not Modify Fuel System
Bleed Fuel System
Service Sections Overview
Service Tasks Performed As Required
Identify Tractor Engine Emissions Status
Open Hood
Remove Side Panels
Access Battery Compartment
Remove Cab Rear Panel
Jack-Up the Tractor—Lifting Points and Support Stand Placement
Service and Connect STC (Snap-to-Connect) Fittings
High-Pressure Washer Use
Identify Zinc-Flake Coated Fasteners
Unified Inch Bolt and Screw Torque Values
Metric Bolt and Screw Torque Values
Service—Break-In (100 Hours or Less)
Perform Break-In Checks
Service—Record Charts
Service Record Chart Overview
Service Interval Chart
Service Record Chart
Service—Clean
Tractor Exterior
Air Intake Valve
Diesel Particulate Filter (DPF)—Final Tier 4/Stage V Engine
Exhaust Filter/Diesel Particulate Filter (DPF) Ash Handling and Disposal
Exhaust Filter Disposal
Engine Cooling System
Access DEF Tank Drain Plug
Cleaning Diesel Exhaust Fluid (DEF) Tank
Clean Display
Dual Beam Radar Sensor
MFWD Axle Vent Breather
Hydraulic Oil Suction Screen
Clean Seat
Implement Connector
Service—Check
Windshield Washer Fluid Level
Engine Coolant Level
Coolant Freeze Point
Water Separator
Optional Fuel Water Separator (If Equipped)
Engine and Exhaust Compartments
Air Conditioning System
Engine Water Pump Weep Hole
Fuel Tank Sump
MFWD Axle Housing Oil Level
Wheel Hub Oil Level
Engine Oil Level
Hydraulic System Oil Level
Tires
Engine Air Intake System
Seat Belts
Auxiliary Drive Belt and Drive Belt Tensioner
Engine Valve Clearance
Secondary Brake System
Transmission PARK System
Service—Tighten
Wheel and Wheel Weight Bolts
Use Wheel Tightening Stand
Use Wheel Torque Wrench Adapter
Rear Wheel Weight Bolts
Front Wheel Bolts
Rear Drive Wheel to Cast Hub Bolts
Rear Steel Wheel to Hub Bolts
Rear Steel Wheels—Cast Hub Bolts
Rear Wheel Bolts—Heavy-Duty Cast 10-Bolt Hubs
Service—Change
Hydraulic Oil and Filters
Engine Oil and Filter
Fuel Filters
Optional Fuel Water Separator Filter Element (If Equipped)
Cab Filters
Cab Fresh Air Filter
Engine Primary and Secondary Air Filters
Fuel Tank Vent Filter
SCV Pilot Valve Filter
Auxiliary Drive Belt
Fan Chain Drive Housing Oil
Differential Oil
Drain 16-Speed PowerShift Transmission
Hydraulic Oil Filters
MFWD Wheel Hub Oil
MFWD Axle Housing Oil
Air Dryer Filter
DEF Tank Vent Filter
Access In-Line DEF Filter
Change Diesel Exhaust Fluid (DEF) In-Line Filter
Access DEF Dosing Unit Filter
Change Diesel Exhaust Fluid (DEF) Dosing Unit Filter
Transmission Torsional Damper
Engine Crankshaft Damper—9.0 L Engine
Engine Coolant
Service—Lubricate
Front Axle Fittings (MFWD)
Rear Hitch
Deluxe Stabilizers
MFWD Axle King Pins, Tie Rod Ends, Axle Pivot Fittings, and Steering Cylinders (1300 MFWD Axle)
MFWD Axle King Pins, Tie Rod Ends, Axle Pivot Fittings, and Steering Cylinders (1500 MFWD Axle)
Draft Link Support Shaft Bushing
Service—Electrical
Service—Electrical Overview
Welding Near Electronic Control Units
Keep Electronic Control Unit Connectors Clean
Compressed Air Use
High-Pressure Washers Use
Disconnect Battery
Service Batteries and Connectors
Load Center—Cab
Load Center—Front
Access Master Fuses
Access Implement Power Relay Module Fuses
Handle Halogen Light Bulbs Safely
Change Halogen Bulbs
Change Front LED Headlight Assembly
Aim Halogen High-Beam Headlights
Aim LED High Beam Headlights
Adjust Front Grille Lights
Aim Headlights
Change Auxiliary Driving Light
Change Cab Roof Light
Change Rear Fender Light—Rear Indicator
Change Extremity Light—Cab
Change Cab Dome Light
Troubleshooting—Procedures
Troubleshooting Features
Electrical System
Engine
Hitch
Hydraulic System
Operator’s Station
Selective Control Valve (SCV)
Steering System
Tractor Operation
Transmission
Troubleshooting—Diagnostic Trouble Codes (DTC)
STOP, Service, and Information Alerts on CommandCenter
Access Diagnostic Trouble Codes
Service—Storage
Place Tractor in Storage
Remove Tractor from Storage
Specifications
Engine
Capacities
Hydraulic System
Transmission and Drivetrain
Hitch, Drawbar, and PTO
Electrical System
Integrated Technology
Overall Dimensions
Tractor Loads/Weights
Ground Speeds—16-Speed PowerShift Transmission
Front Loader Installation—Front Loader Mounting Frames
Required Emission-Related Information
Carbon Dioxide Emissions (CO₂)
China Emission Control Warranty Statement
Identification Numbers
Identification Plates
Product Identification Number (PIN)
Engine Serial Number
Cab Serial Number
Transmission Serial Number
Axle Serial Number
Keep Proof of Ownership
Keep Machines Secure
Change of Ownership
Subsequent Ownership
Predelivery
Predelivery Checklist
Delivery Checklist and Certificate
Index
John Deere Service Literature Available
Technical Information
John Deere Service Keeps You On The Job
John Deere Parts
The Right Tools
Well-Trained Technicians
Prompt Service
John Deere Is At Your Service

Other Products